Wall Mounted •Heavy duty shelf mounted unit for convenience and security •Commercial Grade 26 Amp Induction Motor •230 volt motor comes with 12 foot cord; add your own plug
Triplex Plunger Pump by General Pump •1725 rpm low speed pump is quiet and powerful •Ceramic components run cooler, last longer •Easy to maintain and rebuild
Professional Quality Gun/Wand Assembly •5 quick connect nozzles: 0º, 15º, 25º, 40º, chemical application •50 feet of steel reinforced, high pressure hose
Thermo Sensor •Prevents overheating in bypass mode
Model
Model Number:
WM/EE4020G
Manufacturer:
Pressure-Pro
Made in USA:
Yes
Motor
Motor Type:
Induction
Motor Voltage:
240-Volt Single-Phase
Amps:
26 Amps
Power Cord Length:
Other
Pump
Pump Brand:
General
Pump Type:
Triplex Plunger
Adjustable Pressure:
Yes
Chemical Injection:
Siphon Tube
Pump Consumer Warranty:
5 Years
Pump Commercial Warranty:
5 Years
Housing
Frame Type:
Wall Mount
Wheels:
Not Applicable
Hose
Hose Storage:
Other
Hose Length:
50 ft
Hose Diameter:
3/8 Inch
Hose Connections:
Quick-Connect
Spray Gun
Spray Gun Connection:
Quick-Connect
Spray Gun Grade:
Professional
Spray Gun Wand:
Single Wand
Spray Tips:
Quick Connect Tips (5)
Turbo Nozzle:
Sold Separately
Overview
Weight:
120 Lbs. (54.43 kilograms)
Dimensions:
42L x 22W x 26H (106.68 x 55.88 x 66.04 cm)
Mfr Consumer Warranty:
90 Days
Mfr Commercial Warranty:
90 Days
Download Documents
No documents available at this time
1 Question
Q: I am interested in Pressure-Pro Professional 2000 PSI. We are planing to instal a pressure washer in a hard piped line. I have some question regarding this unit:
1. What are the pipe dimensions on the washer inlet and outlet (not the twistfast connections)? 2. Will this unit require vibration isolation if it is hard piped into a line? If yes, how many feet of flexible hose on inlet and outlet? 3. What are the water supply requirements (flow rate and pressure) to operate the unit at 2000 psi and 4gpm? 4. Is there a pressure relief valve and a pressure gauge on the unit?
Thank you,
Viktor Karpov viktor.karpov@tetrapak.com by Anonymous on December 08, 2011
A: The inlet connection on this machine is standard 3/4" threading, the outlet is 3/8" threading with a 3/8" quick connect fitting installed.
Yes, I would suggest at least 1 ft of rubber flex hose coming off of a hard pipe. I would not be concerned with the outlet, using the high pressure hose is sufficient.
This machine would need at least 50 psi and 4 gpm going into the machine in order for it to operate correctly. You would not be able to run this machine off of a well water supply.
Yes, this machine has a pressure relief valve on the pump but it does not come with a pressure gauge. You would have to purchase the pressure gauge seperately. by Bill, Product Expert