Product Image Disclaimer: "PED is not responsible for any variances from the product in the image and the item you purchase due to supply chain issues. Please review all product specs prior to purchase."
California residents see
Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Developmental Harm.
Product QuestionsAnswered by Jim, the Pressure Washer Expert
1. Will this work on 240 2 Phase. Meaning Fuse Box has 120v on each side. L1 + L2 + Negative
2. Does it come with Auto Stop,no spraying,no motor running, activate wand and auto motor start..
3. I see different inlet water temps depending where I research this unit ranging from 140 to 180, what is the maximum inlet temp from manufacture.
4. Do you have an re-manufactured unjts
5. For injector solutions.
a. are they automatically diluted like 20:1
b. do they have ability to adjust amount of solution?
Ralph
from New York
July 27, 2016
Answer
1. Yes, that is what 240V power is, a 2 pole circuit.
2. This unit does not have the auto start/stop on it. The manual states- During operation do not leave the machine running for more than 2 minutes
without the trigger gun being pulled. Although your machine has a by-pass valve on it and may have a thermal relief system, this can cause extensive pump damage. If machine will not be discharging water for more than 2 minutes, shut the machine off.
3. Handles incoming water up to 160° F
4. We do not sell refurbished units here.
5. See Chemical Injection Use and Calibration section about halfway through OWNERS MANUAL
Was this answer helpful?
Yes
0
No
0
How-To Articles
How to Pick the Perfect Power Washer for a Restaurant
The right pressure washer can significantly reduce cleaning time in your restau...