How to Pick the Perfect Rotary Turbo Nozzle
You can literally carve your name in wood with a red zero-degree spray tip. Unf...
Hover to zoom
1 Of 5
+
Share This Product
Features
Grade
Prosumer
Style
Gas
Inflow
1/4" Snap Coupler (Male)
Outflow
Rotary Spray
- Increases Cleaning Speed by 50%
- High-pressure rotating pencil jet cleans stubborn dirt & stains
- Use only on durable surfaces; test on an inconspicuous area first
- Quick-Connection Plug Included
- Includes one male 1/4" quick connect plug
- Simply snap turbo nozzle into your 1/4" quick-connect lance
- Fits Many Brands Of Pressure Washer
- Works with many 1/4" quick-connects up to 4000 PSI
- Can handle up to 210 F degrees
- 3.5 Orifice Turbo Nozzle
- Check the PSI/GPM chart to find the right orifice size
- Nozzle size is laser etched on the rugged brass body
California residents see
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause Developmental Harm, and Diisononyl phthalate (DINP) which is known to the State of California to cause Cancer.
For more information go to: www.p65Warnings.ca.gov
Specifications
16.0296
Accessories
Accessory Grade
Prosumer
Accessory Style
Gas
Inflow
1/4" Snap Coupler (Male)
Outflow
Rotary Spray
Rated PSI
4000 PSI
Orifice Size
3.5
Overview
Weight
.75 Pounds
Consumer Warranty
90 Days
Product Length
6 Inches
Product Width
1.8 Inches
Product Height
1.8 Inches
UPC
013964388374
Reviews
(12)
MTM Hydro 16.0296 Reviews & Ratings
Product Q&A
(2)
Product Questions
Answered by Jim. the Pressure Washer Expert
Question
+−
Hi,
I noticed on your turbo nozzle info page you mention to use the lowest orifice possible for more power, but then the chart shows larger and larger orifices depending on pressure and gpm.
I'm using a 3000 psi 3gpm unit and considering this MTM hydro 3.0 orifice nozzle based on your general guidance of using the smaller orifice for more power. However, it looks like the chart recommends 3.5 orifice for 3000psi @3gpm.
Which should I go? Is it a mistake to grab the 3.0?
Thanks!
Andrew Czop
from Virginia
June 26, 2016
Answer
It's a balancing act- going a half size smaller will increase the intensity of the turbo action spray- but letting less water through will slow down how quickly you can cover the area you're cleaning. It all depends on the job you're doing- cleaning graffiti may require more power in a smaller area; cleaning a moldy deck could get done faster with a little less power and more water volume.
I wouldn't recommend adjusting more than a half size up or down for best performance.
I wouldn't recommend adjusting more than a half size up or down for best performance.
Was this answer helpful?
Yes
0
No
0
Question
+−
I'm buying a generac gas model# 6598 from you guys and am looking at MTM hydrojet turbonozzle to go with it.What size orifice should I get? We have a two story home (30' to gable ends) will MTM Hydro long-range detergent foamer work?
Bruce E Lawrence
from Maine
April 17, 2014
Answer
You should get a 3.0 Orifice Turbo Nozzle. Turbo Nozzles are meant to increase cleaning speed and efficiency, not for long distances. I have attached a link for you.
3.0 Orifice Turbo Nozzle
For your two story home and gables I would go with model 100145. This product allows you to reach up to 3 stories high. I have included a link to this as well.
Model 100145
Both of these product will quick connect on to the end of your lance where the colored spray tips usually go.
3.0 Orifice Turbo Nozzle
For your two story home and gables I would go with model 100145. This product allows you to reach up to 3 stories high. I have included a link to this as well.
Model 100145
Both of these product will quick connect on to the end of your lance where the colored spray tips usually go.
Was this answer helpful?
Yes
0
No
0
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
How-To Articles
How to Remove Graffiti with a Pressure Washer
Stepping out in the morning to find your property defaced with graffiti can be h...
How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Pressure Washers How-To Library
Articles, Tips and Buying Guides from Our Experts
+
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
MTM Hydro Hydrojet 3.5 Orifice 4000 PSI Turbo Nozzle w/ QC Filter
Customer Review Images
