Product QuestionsAnswered by Jim, the Pressure Washer Expert
I just received this pump do these pump come with pump oil already in them ?
Ricardo Ayala
from Michigan
July 27, 2016
Answer
Yes, the pump oil is already in it. You will see the sight glass on the front, the oil should be at the red dot- not higher or lower.
Was this answer helpful?
Yes
0
No
0
I am looking for a pump to fit a Honda GX340 .
Dennis Lillrose
from Michigan
March 08, 2016
Answer
You have chosen a perfect pump to go on your Honda GX340 engine. This is fully plumbed meaning the inlet and outlet fittings, unloader, external bypass, and thermal relief valve are already installed so all you will have to do is bolt on the new pump, set the unloader, and you are ready to go!
Was this answer helpful?
Yes
3
No
0
Are parts available to repair an EZ4040G General pump? I.E., need pressure relief valve, thermal relief valve, valve kit(pressure)
R Cox
from
February 21, 2012
Answer
Unfortunately we do not carry any parts for this particular pump. However, the parts are definitely available. This pump is a rebuildable pump so there should not be any problems getting these parts replaced.
If you contact General Pump directly, they can refer you to one of their parts delaers to where you can get the components you need. General Pump can be reached at (888) 474-5487.
Was this answer helpful?
Yes
0
No
0
Pressure-Pro Slap Happy General EZ4040G Replacement Pump w/ PulsarEZ Plumbing Kit ... 3/8 or 1"? Will this fit a honda 13 hsp Ec-Cell modle #ZR 3600 ...
sorry but still i want know ez 4040g will be fit on zr3600 and if so i will get my order thanks
from
December 22, 2011
Answer
This pump accepts a 1 inch diameter shaft. There should be no problem at all connecting this pump up to a 13 HP Honda engine. That size Honda engine will definitely have a 1" shaft.
This pump is the EZ4040G model pump, the SLP version just includes all the plumbing that is needed for the pump to operate correct. These parts would include the unloader valve, bypass valve, and chemical injector.
Was this answer helpful?
Yes
0
No
0
Bill
What is the female shaft opeing? 3/8 or 1"?
Will this fit a honda 13 hsp Ec-Cell modle #ZR 3600
Todd Wilson
from Michigan
May 25, 2011
Answer
This is going to be a 1" shaft opening. This would work on the washer you have. The bolt pattern for mounting may not be exactly correct, but nothing a pump adapter wouldn't solve.
Thanks,
Pressure Washers Direct
Was this answer helpful?
Yes
0
No
0
have a shark hot water unit..sgp 40357e...will the pressure pro slap happy general ez4040g work properly with this unit ? thx
Dave
from Texas
March 31, 2011
Answer
This pump would be compatible with your machine as long as you have a 1" shafted engine. However, this model is a cold water pump. The max inlet water temp for this pump is 104 F degrees.
Was this answer helpful?
Yes
0
No
0
Do you ship this item to Australia? If so, how much would shipping be?
Jacque
from
March 31, 2011
Answer
Unfortunately we do not ship products outside of the U.S. Sorry, I would be unable to quote you on shipping this product to Australia.
Was this answer helpful?
Yes
0
No
0
How-To Articles
How To Pick The Perfect Replacement Pressure Washer Pump
If your pressure washer turns on, but won't pressurize water, don't give up on ...