Rotary Turbo Nozzle Buyer's Guide
How to Pick the Perfect Rotary Turbo Nozzle
You can literally carve your name in wood with a red zero-degree spray tip. Unfortunately, the pencil-thin stream is so narrow that it can’t cover much surface area. It would take a very long time to clean a driveway with a zero-degree spray tip. Now, imagine the strength of a red spray tip spinning at supersonic speed.
That’s what a turbo nozzle does. By spinning the stream of water, it cleans a wider path. This way, you can clean larger areas with the highly concentrated zero-degree stream.
How Does a Turbo Nozzle Work?A rotary turbo nozzle automatically spins a zero-degree spray tip in a 4-8 inch circle at 3000 rotations per minute. The spinning water jet hits the surface area from multiple angles, quickly breaking down caked-on dirt and grime. As a result, rotary nozzles can cut cleaning time in half.
They are designed to work by attaching to a pressure washer lance using specific connections, and cannot be attached directly to any other water source, such as a garden hose.
Why Sizing a Turbo Nozzle is ImportantPicking the right turbo nozzle is similar to selecting spray tips. This is important because the purpose of a turbo nozzle is to fully utilize the highest pressure possible while increasing the coverage area of your pressure washer. If the turbo nozzle orifice is sized too large, it will dilute the pressure, and if it is too small, it will break under too much PSI. The wider the orifice, the lower the end pressure will be.
How to Choose a Turbo NozzleThe proper way to size a turbo nozzle is to choose the orifice size based on GPM (gallons per minute rating) and PSI requirements (use the chart below). After you have an orifice size selected, you have a few other things to consider:
- How will it attach to your pressure washer? (Inflow Coupler)
- Is it rated for hot water and cold water? (Temperature Ratings)
What Are Turbo Nozzles Made Of?Most turbo nozzles contain elements of ceramic, alloy, aluminum, stainless steel, brass, and plastic. Turbo nozzles are designed to optimize and maximize the pressure you can get out of your pressure washer, all the while cleaning surfaces faster without exerting more effort.
How to Use a Turbo NozzleOnce you choose the right nozzle, how do you connect it? Connecting it should be simple once you choose the proper connection, typically a 1/4" quick connect that attaches to your lance in seconds. If you need to change tips and have a quick-connect attachment, simply lift up the retaining piece, insert the new nozzle, then release the retainer to secure it into place.
Keep in mind that running your pressure washer without pulling the trigger can cause damage to your pump or cause overheating. Your turbo nozzle does not act like an unloader valve, which prevents that damage, so be sure to turn off your pressure washer as soon as you pause when cleaning to be safe.
When you're done using your turbo nozzle and it's been disconnected, carefully use a pin to clean the nozzle and all tips before each use.
Common Applications for Turbo NozzlesReady to test out a turbo nozzle? Here are some ideas to get you started with cleaning better, faster. Many cleaning projects are made tougher because of small angles, large areas, and hard-to-reach crevices. These projects can be completed at least twice as fast with a rotary turbo nozzle, and they make cleaning faster and a more pleasant experience.
- Clean Exterior Walls and Siding
- Clean Concrete Sidewalks and Brick Patios
- Clean a Fence and Strip Paint
- Clean Deck and Railing
- Clean Patio Furniture