Fully Plumbed and ready to go - 4 bolts off - 4 bolts on
Comes with unloader, pressure relief valve, pressure washer hose plug, and garden hose inlet w/ filter
24 MM Solid Shaft
Provides a smooth liquid flow at 1450 RPM
15 oz. crankcase with one-piece plunger design eliminates water entering crankcase
Offers Maximum 3500 PSI & 5.6 GPM
Heavy-duty advanced forged brass manifold
Solid ceramic plungers with dust protection chamber
Rated for a maximum 125 PSI and 165-degree temperature
Pulsar EZ Unloader
Adjust the pressure to suit the task at hand
Eliminates back pressure when pulling a manual start engine
External Bypass Hose
Carries water to the inlet when the unloader valve opens
Adds safety if water circulates in pump for too long and quickly heats to dangerous temperatures
Be Sure To Measure Flange Bolt Holes & Shaft Accurately!
There is a 25% restock fee on returned pumps
Pumps should not be allowed to operate in bypass mode for more than 1 minute
Please Call Us For Sizing Assistance w/ Information Below:
1. Age of Pump and Model # (must be no more than 15-yrs old)
2. Is the pump Vertical or Horizontal
3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
4. Engine Brand and HP (model # if available would be helpful)
***Shaft Size Measurements Must Be Precise***
California residents see
Warning: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause Cancer, and Toluene which is known to the State of California to cause Developmental Harm.