Product QuestionsAnswered by Jim, the Pressure Washer Expert
I am looking for a pump to fit a Honda GX340 .
Dennis Lillrose
from Michigan
March 08, 2016
Answer
You have chosen a perfect pump to go on your Honda GX340 engine. This is fully plumbed meaning the inlet and outlet fittings, unloader, external bypass, and thermal relief valve are already installed so all you will have to do is bolt on the new pump, set the unloader, and you are ready to go!
Was this answer helpful?
Yes
3
No
0
Will the cat dx 67 replace the cat 3000psi pump that came on my ridgid pressure washer as far as the flange bolting up the same?
Jeremy Davis
from West Virginia
August 18, 2014
Answer
In order to make sure it is compatible with you machine you need to be sure of a few things.
1. Engine shaft diameter size
2. What is the HP or CC of your motor
3. The number of bolt holes your pump has
4. Whether your pump is horizontally or vertically mounted
After knowing those things we can better assist you in which replacement pump is right for you.
Was this answer helpful?
Yes
0
No
0
the cat 67 dx I just bought 4000 psi pump ..I don't understand the purpose and how to adjust the black preloader adjustment knob..this expensive pump came with absolutely no manual or paperwork,kinda disappointed with my purchase..thats not right!!
James
from New York
May 26, 2014
Answer
They have gone to a green company and all manuals are done online. I have attached a link to the manual that CAT makes for the unit. The Un-loader is adjusted by turning it to the right or left. Left will loosen the unloader lowering pressure. When the dial is tightened all the way to the right it will perform at MAX PSI.