Expert Recommended AccessoriesSelected by Jim, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
Features
Grade
Professional
Style
Gas
Inflow
1/4" Snap Coupler (Male)
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
Sandblasting Kit Is Powered By Your Pressure Washer
Effectively removes graffiti, paint, & rust with correct orifice
Must have at least 3000 PSI/3 GPM, maximum 5000 PSI/8 GPM
Easy To Use
Attach the housing to your wand with the included fittings
Insert the probe into a bucket of sand or media
Siphon action pulls the sand into the pressure stream
Nozzle must be 0° Threaded nozzle fitting the specs of your machine
Correct sized orifice nozzle will greatly impact the performance
Included Items In Complete Sandblast Kit:
Industrial sandblast kit w/ head, probe, and hose
1 - Threaded 0° 4.0 nozzle
1 - Threaded 0° 5.0 nozzle
1 - 1/4" plated steel Male plug to install at blast head inlet
1 - Roll of Teflon tape for installation
Tips:
Use the right sized nozzle!
Make sure your blast media is dry
Keep your draw line (hose) interior dry
Orient the sand barb (hose) to the top of the blast head so the sand drops into the chamber with the help of gravity, this will also limit the amount of water that could run down the hose if it was at the bottom.
Once you start cleaning limit the starting and stopping as this will create valleys of settled blast media in the draw hose and create an inconsistent flow of sand when you re-start.
California residents see
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause Cancer.