Hose Reel For 200 Feet of 3/8" High Pressure Hose •4,000 PSI maximum pressure; 140°F temperature •(Jumper hose 30.0030 sold separately)
Heavy Duty Steel Frame •ideal for pressure washer & sewer jetter use •Powder coat finish resists corrosion
Direct Hand Crank •Convenient locking mechanism & full flow brass swivel joint •Drum lock keeps hose tidy
Recommended For Cold Water Use Only •3/8" NPT male inlet; 3/8" NPT female outlet
4-1/4" x 6" Mounting Plate •Quickly & easily mounts to most vertical & horizontal surfaces
Accessories
Accessory Grade
Prosumer
Accessory Style
Gas
Inflow
3/8" Threaded (Male)
Outflow
3/8" Threaded (Female)
Rated PSI
4000 PSI
Overview
Weight
17.8 Pounds
Product Length
21 Inches
Product Width
13.25 Inches
Product Height
16.5 Inches
Consumer Warranty
90 Days
UPC
013964388091
Model
27.0007
Download Documents
No documents available at this time
3 Questions
Q: Mike, I just received delivery of the MTM pressure washer reel to match with my ElToro pressure washer and the sewer blow out kit from you or someone else. It doesn't seem to be a match. The sewer kit includes a trigger mechanism that joins the pressure hose at end of pressure hose line. The fittings on the MTM reel don't match pressure hose fitting. Should I have bought different reel? Thanks by Ron Valentine from California on June 29, 2016
A: I checked our files- you got the Sewer Genie and the hose reel from us (Pressure Washers Direct).
The description of the hose reel says it comes with 3/8" NPT (threaded) male inlet and 3/8" NPT (threaded) female outlet. The Sewer Genie spray gun has a male quick connect plug so at least one end of your hose is a female quick connect.
I don't know what's at the other end of your hose since we don't sell ElToro pressure washers, but if you check out our list of 3/8-Inch Adapters you should be able to find something that will mate the end of your hose and have a 3/8" male NPT (threaded) connection to mate with the outlet connector on the reel. by Brian, Product Expert
Q: could this reel be mounted to the interior waa of a van? also does it have a braking system on it? by Darrell on January 23, 2012
A: Yes, you could mount this hose reel to any flat surface. This hose reel does have a type of locking/breaking mechanism included with it to keep the hose at a steady length or fully retracted. by Brian, Product Expert
Q: Just purchased a Smpson ps4240H pressure washer from you guys the thing is a beast,I like it,but its to heavy so may have to keep it the back of my truck when pressure washing,Im thinking of mounting a hose reel,do you think the MTM Hydro 200 will be alright seeing that its only rated at 4000 psi and my pressure washer is 4200psi? and were would you mount it on the pressure washer? by Mike Hill from Washington on August 14, 2011
A: Yes this hose reel would be compatible with your machine, the pump on that model is actually a 4000 psi pump. The additional psi comes from the restriction of water through the hose and gun. However, this hose reel does not come with any type of mounting hardware to attach to a pressure washer. This reel is designed to mount to a table or wall.
If you are looking for a hose reel that can be attached to the machine itself, you should look at models DHR50150D or DHR50100D by General Pump. by Brian, Product Expert
I'd Buy It Again (1) Reliable (1) Easy To Use (1) Durable (1)
Cons
Not (1) Not Witho (1) Difficult To Use (1) Bad Instructions (1)
40% of respondents would recommend this product to a friend
6 Reviews
Sort by
Aaron D. Lynnwood, WA
Purchased 2/27/17
2 Reviews
Most Helpful Positive Review
REVIEWED
MAY.
03
2017
Solid Reel
Solid hose reel.
Pros:Durable, Easy To Use, Reliable, I'd Buy It Again
Aaron Recommends This MTM Hydro Product
Was this review helpful?
13
Graham J. Lakeland, FL
Purchased 11/28/11
3 Reviews
REVIEWED
DEC.
20
2011
Great!
I have been using the Simpson PS4240 with the Monster 50 hoses and the MTM Hydro reel. I am pleased with all of the items I purchased.
I have chosen not to run my water and chemicals through the reel so I cannot speak to its performance in that aspect. I have a few buddies who could be classified as old pros in the business and both said that if I ran chemicals through the reel I would be buying a new one every year.
If I only use the reel to roll my hose it should last significantly longer. The reel was easy to mount to my truck bed and easily holds my 150' of hose.
I have been using the Simpson PS4240 with the Monster 50 hoses and the MTM Hydro reel. I am pleased with all of the items I purchased.
I have chosen not to run my water and chemicals through the reel so I cannot speak to its performance in that aspect. I have a few buddies who could be classified as old pros in the business and both said that if I ran chemicals through the reel I would be buying a new one every year.
If I only use the reel to roll my hose it should last significantly... more
Was this review helpful?
73
Paul W. White, GA
Purchased 1/5/15
REVIEWED
JAN.
27
2015
Nice Wide Reel
This reel works great for me. I have 100' of hose and i don't always roll it neat.
Paul Recommends This MTM Hydro Product
Was this review helpful?
30
Richard Ferrer Merritt, NC
Purchased 2/27/15
REVIEWED
MAY.
01
2015
Broke After A Few Weeks Of Use.
At first, I loved the reel. However after about 10 uses it started spraying water everwhere out of the swivel. Really dissatisfaction with this product. Now I get to spend tomorrow taking it apart to see if it can be fixed. Poorly constructed steer clear of this hose reel.
Richard Does Not Recommend This Product
Was this review helpful?
42
Ronald V. Alameda, CA
Purchased 6/10/16
6 Reviews
REVIEWED
JUL.
15
2016
A Dilemma
What to do? I now have my Honda Pressure washer (purchased previously) my MTM Hydro hose Reel, and my sewer conversion kit 100'. This last item has a trigger assembly on one end and nozzle fixed to the other end. Trying to mate these units has proved an expensive failure. If the sewer kit is to be rolled up on the MTM reel, must the trigger assembly be removed and discarded? If a 3' pressure pig tail joins the reel assembly to PW instead of a pressure hose with a wand on its end, what adapter do I need to accept the pig tail? I can't buy all the adapter options and hope for the best. Duane Dennis' N.Y review of this same dilemma is spot on.
What to do? I now have my Honda Pressure washer (purchased previously) my MTM Hydro hose Reel, and my sewer conversion kit 100'. This last item has a trigger assembly on one end and nozzle fixed to the other end. Trying to mate these units has proved an expensive failure. If the sewer kit is to be rolled up on the MTM reel, must the trigger assembly be removed and discarded? If a 3' pressure pig tail joins the reel assembly to PW instead of a pressure hose with a wand on its end, what adapter... more
Cons:Bad Instructions
Ronald Does Not Recommend This Product
Product Expert
Ronald,
You will still need the trigger gun to control the pressurized water supply through the jetter hose and jetter nozzle. Discarding it doesn't seem be to a good decision.
The hose reels we sell are plumbed for pressure washer hose- the connection order is pressure washer to hose reel jumper; hose reel to hose, hose to spray gun and wand.
You are trying to put a pressurized hose reel between the gun and the nozzle- I don't know of any adapter set that will allow that to happen in a functional way. At best I would think you could use the reel as a storage reel to make using the jetter hose a little easier- just wind the jetter hose on the reel the way you would a power cord to keep the hose tidy, with no water connection to the reel.
If you have questions for the folks at MTM Hydro you can contact them directly at 866-686-4020.
.
Having owned and used my Honda gas PW for several years on more than a few boats, I had a new need: pressure blast clogging lateral sewer line, house clrean out to street. I bought the sewer clean out kit, 100' 3/8" and connected it to the pressure water line from PW. It worked as advertised, but was a tangled mess to store. So I bought the hose roller above and find the instructions for use confounding. I then bought and received today a short (3') pigtail and brass connectors hoping to make all work together. So far the pieces I have are collectively bewildering. The roller pigtail is to connect to PW output? Then the sewer line kit to the roller? There is little help here in sorting it out. Back to square one.
Having owned and used my Honda gas PW for several years on more than a few boats, I had a new need: pressure blast clogging lateral sewer line, house clrean out to street. I bought the sewer clean out kit, 100' 3/8" and connected it to the pressure water line from PW. It worked as advertised, but was a tangled mess to store. So I bought the hose roller above and find the instructions for use confounding. I then bought and received today a short (3') pigtail and brass connectors hoping to... more
Cons:Difficult To Use, Not Witho, Not
Ronald Does Not Recommend This Product
Product Expert
Ronald,
The email we sent you about the Hose Reel Pigtail said "The easiest thing to do is to take the fitting that comes off of your pressure washer pump (that the high pressure hose was connecting to) and put that on the inside of the hose reel where the hose on the hose will be wound. You will then attach the high pressure hose here.
There is a jumper hose that you need to screw in to the pump and into the mounting base of the hose reel (bottom of product picture). I think this is where the confusion is coming in. You need a pigtail/jumper hose to go from the pump to the hose reel. You will need to order model 30.0030. http://www.pressurewashersdirect.com/MTM-Hydro-30.0030/p9918.html " If you have further questions about your hose reel you may want to call the folks at MTM Hydro at 866-686-4020.
As I explained in your earlier review- we don't have your ElToro/Honda pressure washer here, nor do we have the hose reel or the sewer jetter to put them all together for a test fit. That's why I referred you to our adapter page so you could look at your pressure washer and the accessories in front of you and choose which adapters will work best for the purpose you have in mind.
"My experience with the roller, sewer line kit (100') has not been good. Instructions for use with roller, completely unhelpful. Phone help marginal other than to spend more $$ on more pieces. I would like to see how all three pieces: PW, Roller, Sewer kit look matched up properly."
As I explained in your earlier review- we don't have your ElToro/Honda pressure washer here, nor do we have the hose reel or the sewer jetter to put them all together for a test fit. That's why I referred you to our adapter page so you could look at your pressure washer and the accessories in front of you and choose which adapters will work best for the purpose you have in mind.
Shop for the MTM Hydro Pressure Washer Hose Reel 200' x 3/8" at Pressure Washers Direct. Research MTM Hydro 013964388091 pressure washer hoses online. Find MTM Hydro 27.0007 pressure washer hoses & power washer storage winder features and specifications. Get the best deal; compare MTM Hydro 27.0007 prices now. Buy the 27.0007 direct and save.
![Share This Product](https://www.facebook.com/sharer.php?s=100&p[title]=MTM Hydro Pressure Washer Hose Reel 200' x 3/8"&p[url]=https://www.pressurewashersdirect.com/MTM-Hydro-27.0007/p6151.html&p[summary]=Buy MTM Hydro 27.0007 Direct. Tax-Free. Check the MTM Hydro Pressure Washer Hose Reel 200' x 3/8-Inch ratings before checking out.&p[images][0]=https://www.pressurewashersdirect.com/products-image/280/27-0007_6151_600.jpg)
