High Pressure 3/8" R2 Hose •Rated to 4000 PSI and 310° F maximums
Non-Marking Rubber Coating •Blue color won't stain or leave black streaks on surfaces
Sturdy Construction •Rugged single steel wire layer covered by durable blue rubber •Prevents gashes & ruptures
Rubber Bend Restrictors On Each End •Keeps hose ends from premature wear & fatigue
3/8" Quick Connectors •One end is a 3/8" male quick connect; the other is female •Fits many brands of pressure washer
American Pride •Assembled in the U.S.A.
Hose
Hose Length
100 Feet
Hose Material
Wire Reinforced
Hose Diameter
3/8 Inch
Hose Connections
Quick-Connect
Accessories
Accessory Grade
Prosumer
Accessory Style
Gas
Inflow
3/8" Snap Coupler (Male)
Outflow
3/8" Snap Coupler (Female)
Rated PSI
4000 PSI
Overview
Weight
18.9 Pounds
Product Length
14 Inches
Product Width
14 Inches
Product Height
10 Inches
Consumer Warranty
90 Days
UPC
013964388282
Model
29.0124
Download Documents
No documents available at this time
3 Questions
Q: My NON-MARKING hose is leaving marks!! Help? by Margaret Mulberry from Illinois on October 17, 2014
A: Regarding non-marking leaving “marks” the non-marking hose jacket is a silicone rubber compound. When being used it does not permanently mark or staining the surface.
However all hoses, standard and non-marking blue and gray, when being dragged across a rough surface have small particles of the rubber outer cover abraded off. With non-marking hose there is no carbon black in the jacket material that stains or permanently marks the surface. The small particles of rubber jacket however will show and can collect in depressions on the surface or where rinse water is channeled by the hose itself or other equipment. These particles are easily rinsed away. High temperature operation softens the silicone rubber jacket material and causes the hose to abrade easier leaving more jacket material on the surface.
Standard black pressure washer hose is a different rubber compound that contains carbon black. When black hose is exposed to water, high temperatures and many common pressure washer chemicals the carbon black will leach out of the rubber jacket and permanently stain the surface.
Needs A Swivel Adapter Where You Attach To Hose Reel
Durability (1)
53% of respondents would recommend this product to a friend
20 Reviews
Sort by
Mike M. Delray Beach, FL
Purchased 11/8/16
Most Helpful Positive Review
REVIEWED
DEC.
01
2016
Was Disappointed At First
I have to say I was quite disappointed at first.
I set up all my equipment, got up on the roof, and the dam the hose was leaking water from the coupler. I was up on the roof and had to go down, get some tools, and tighten the coupler. It seemed as though it was only finger tight.
After that I am very pleased with this hose! Very light weight and easy to handle.
Pros:Durable, Easy To Use, High Quality, I'd Buy It Again
Love the light weight feature of this hose, however, we ordered two of them and within 3 months, both have developed holes with relatively light use.
Pros:Easy To Use
Cons:Unreliable, Low Quality
Jim Does Not Recommend This Product
Product Expert
Jim,
These hoses have a single steel wire layer covered by durable blue rubber. They don't leave marks on sidewalks & pavement but dragging them over rough surfaces will wear them out prematurely instead of picking them up to move them.
A hose with dual braid construction like Simpson's Monster Hose should last longer since they are made with polyester braid over tough liner, then brass coated steel braid covers the polyester braid, and clear, non-marring outer jacket covers the brass coated steel braid.
However- even Monster Hose will wear prematurely if dragged repeatedly for long distances over rough pavement.
I am happy with this product. It I easy to pull and roll up. The couplings were tight. An extra benefit Is the "debris" its drug through doesn't stick to it as bad as other hoses.
Pros:Easy To Use, I'd Buy It Again, Price, Fast
Connie Recommends This MTM Hydro Product
Was this review helpful?
00
Brian
3 Reviews
REVIEWED
JUL.
27
2016
Do Not Buy!!!! Garbage
These hoses are junk. I own a pressure washing. business , so I decided to purchase this hose and give it a shot. What a bad decision on my part.
This hose broke 3 times ( I continued to get it fixed everytime) within 5 months of use. Never was it dragged over rough surfaces unless you consider grass a rough surface. Now it's a backup hose in case I need one in a pinch. Pay the extra $$$ and get a real hose.
Brian Does Not Recommend This Product
Was this review helpful?
01
Dan G. Glenside, PA
Purchased 5/3/16
REVIEWED
JUL.
06
2016
Busted
I have officially broken almost every one I purchased. I would recommend the 6k psi hose the 4K is a bust.
Dan Does Not Recommend This Product
Product Expert
Dan,
It sounds like you put your hoses through a lot- I'm glad the 6000 PSI hoses are holding up.
If you need a 4500 PSI hose you may want to check into Simpson Monster Hose. It's one of the toughest on the market.
As always, EZ ordering, good tech support, fast delivery.
Just needed to Teflon tape the fittings on both ends, no big deal there as I like to do this myself to be sure it gets done right in any event. I would redo it if it came with Teflon tape anyways.
Looks like a good durable hose, nice flexibility factor, good quality, looks like a PRO hose should.
Will look very professional on my job sites and I understand it will be EZ to clean up and rinse down after use. The non-marking feature is huge as clients can get really bent out of shape seeing ANY DRAG MARKS from hoses. Also a hassle to rewash hose drag marks, not time efficient.
I am confident this hose will give me a good lifespan when treated with care as any piece of equipment should be for A LONG SERVICE LIFE.
As always, EZ ordering, good tech support, fast delivery.
Just needed to Teflon tape the fittings on both ends, no big deal there as I like to do this myself to be sure it gets done right in any event. I would redo it if it came with Teflon tape anyways.
Looks like a good durable hose, nice flexibility factor, good quality, looks like a PRO hose should.
Will look very professional on my job sites and I understand it will be EZ to clean up and rinse down after use. The non-marking... more
Sometime mid last summer I switched supply companies to direct, so far every product I've purchased has been low quality, it may be less expensive but the quality of everything is so low it's not even worth trying. This is the only type of hose I've ever seen rust from the inside out, I only found out about it when one day while working the hose imploded from 6 different spots! Add to that the lousy I stoner service and the fact that this "non marking hose" marks concrete as well as asphalt this is just overall a bad product. I recommend against this hose entirely and am switching back to my old supplier permanently.
Sometime mid last summer I switched supply companies to direct, so far every product I've purchased has been low quality, it may be less expensive but the quality of everything is so low it's not even worth trying. This is the only type of hose I've ever seen rust from the inside out, I only found out about it when one day while working the hose imploded from 6 different spots! Add to that the lousy I stoner service and the fact that this "non marking hose" marks concrete as well as... more
Pros:Quiet, Price
Cons:Low Quality, Unreliable, Durability, Broke Within Six Months Of Use Also Leaves Marks In Concrete
Josh Does Not Recommend This Product
Product Expert
Josh,
I spoke with the folks at MTM Hydro about this hose. The connectors are zinc-plated steel since they will wear longer and are more cost effective than stainless steel- but they will eventually show rust. This shouldn't hurt performance.
I also checked on the non-marking blue covering. It's silicone rubber, so if any of the covering is scraped off as it's dragged over a rough surface it will be easy to rinse it off. Less expensive hoses will leave black carbon marks which, like black shoe marks on the gym floor, are almost impossible to remove.
I also learned something new about single steel braid. If the covering is rubbed off by being dragged over a harsh surface (or run over by vehicles) then water can penetrate into the steel braid by capillary action. If the hose isn't drained and wiped down when it's put back on the hose reel, that water will cause rust to develop and the hose will fail prematurely.
To get the best performance from any pressure washer hose: flush any chemicals you use (especially something caustic like bleach!) out of the hose when you're done, make sure the water is drained out of it and wipe it down before you store it, and lift and move the hose over harsh surfaces whenever possible.
Bought a new power washer hose, needs a swivel adapter where it attaches to the hose reel.
Pros:Durable, Easy To Use, High Quality
Cons:Needs A Swivel Adapter Where You Attach To Hose Reel
Derek Recommends This MTM Hydro Product
Was this review helpful?
33
Ruby W. Wilcox, NE
Purchased 8/3/13
REVIEWED
AUG.
24
2013
Power Washer Hose
I needed an extra 100' to go with my 250' of hose to power wash a farm building for painting.
Pros:I'd Buy It Again
Ruby Recommends This MTM Hydro Product
Was this review helpful?
33
Noel T. Ocoee, FL
Purchased 4/27/13
REVIEWED
MAY.
19
2013
Cheap Hose Ends
The hose ends fittings are easily rusting and not a good quality.
Product Expert
Noel,
These hoses are meant for professional use and should hold up; this is our first report of rusting fittings.
You are still within the 90 day Factory Warranty period, so please give the folks at MTM Hydro a call, toll free, at (866) 393-3968 so they can help you.
Shop for the MTM Hydro Kobrajet 100-Foot (3/8") Non-Marking Blue 4000 PSI High Pressure Hose w/ Quick Connectors at Pressure Washers Direct. Research MTM Hydro 013964388282 pressure washer hoses online. Find MTM Hydro 29.0124 pressure washer hoses & pressurewasher hose 100ft 3/8" features and specifications. Get the best deal; compare MTM Hydro 29.0124 prices now. Buy the 29.0124 direct and save.
![Share This Product](https://www.facebook.com/sharer.php?s=100&p[title]=MTM Hydro Kobrajet 100-Foot (3/8") Non-Marking Blue 4000 PSI High Pressure Hose w/ Quick Connectors&p[url]=https://www.pressurewashersdirect.com/MTM-Hydro-29.0124/p8422.html&p[summary]=Buy MTM Hydro 29.0124 Direct. Tax-Free. Check the MTM Hydro Kobrajet 100-Foot (3/8-Inch) Non-Marking Blue 4000 PSI High Pressure Hose w/ Quick Connectors ratings before checking out.&p[images][0]=https://www.pressurewashersdirect.com/products-image/280/product_8422_500.jpg)
 Non-Marking Blue 4000 PSI High Pressure Hose w/ Quick Connectors ratings before checking out. "Pin It!")
