How to Pick the Perfect Replacement Hose
High-pressure hoses take a heck of a beating from the pressurized water they co...
Hover to zoom
1 Of 5
BE 50-Foot (3/8") 4000 PSI Grey Non-Marking High Pressure Hose w/ Quick Connectors (Hot/Cold Water)
Model:
85.238.155
+
Share This Product
Features
Grade
Professional
Style
Gas
Inflow
3/8" Snap Coupler (Male)
Outflow
3/8" Snap Coupler (Female)
- 50-FT Professional Grade 3/8" Replacement / Extension Hose
- High pressure hose for cold & hot water pressure washers
- Professional level hose fits many contractor & residential pressure washers
- Grey Non-Marking Rubber Covering
- Won't leave marks on concrete, floors, pavement, houses, or buildings at your power washing jobs
- Single Wire Steel Braid Construction
- Withstands high tension and compression strength
- Wire braid reinforcement keeps the hose sturdy & kink-resistant
- Rubber Bend Restrictors On Both Ends
- Helps reduce wear & tear on the connectors
- Long-lasting durability w/ high-performance capabilities
- Universal 3/8" Quick Connectors
- Swivel on one end helps keep hose from kinking
- Female brass coupler; other end is male plated steel plug
- Fits Many Brands Of Pressure Washer
- Rated to 4000 PSI and 310°F maximums
- Replace a worn hose or extend your existing hose
- Not for use with steam
California residents see
Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Developmental Harm.
For more information go to: www.p65Warnings.ca.gov
Specifications
85.238.155
Hose
Hose Length
50 Feet
Hose Material
Wire Reinforced
Hose Diameter
3/8 Inch
Hose Connections
Quick-Connect
Temperature
hot/cold
Non-Marking
Yes
Accessories
Accessory Grade
Professional
Accessory Style
Gas
Inflow
3/8" Snap Coupler (Male)
Outflow
3/8" Snap Coupler (Female)
Rated PSI
4000 PSI
Overview
Weight
10 Pounds
Consumer Warranty
90 Days
Product Width
3/8 Inches
Product Height
3/8 Inches
Dimensions
50 Feet
UPC
777897108453
Reviews
(13)
BE 85.238.155 Reviews & Ratings
Product Q&A
(2)
Product Questions
Answered by Jim. the Pressure Washer Expert
Question
+−
Can you tell me if this is a flexible rubber covering on this hose? I currently have the 50' simpson monster hose and am constantly fighting with it when trying to move it around because it is not as flexile especially when the outdoor temps are a little cooler.
Thanks.
Chris
from New York
July 07, 2016
Answer
This is a single braid-reinforced rubber hose, so it will be a lot more flexible than the Monster Hose.
The trade off is that it will be less durable, since the Monster Hose has a brass coated, steel braid over a polyester braid.
The trade off is that it will be less durable, since the Monster Hose has a brass coated, steel braid over a polyester braid.
Was this answer helpful?
Yes
0
No
0
Question
+−
My NON-MARKING hose is leaving marks!! Help?
Margaret Mulberry
from Illinois
October 17, 2014
Answer
Regarding non-marking leaving “marks” the non-marking hose jacket is a silicone rubber compound. When being used it does not permanently mark or staining the surface.
However all hoses, standard and non-marking blue and gray, when being dragged across a rough surface have small particles of the rubber outer cover abraded off. With non-marking hose there is no carbon black in the jacket material that stains or permanently marks the surface. The small particles of rubber jacket however will show and can collect in depressions on the surface or where rinse water is channeled by the hose itself or other equipment. These particles are easily rinsed away. High temperature operation softens the silicone rubber jacket material and causes the hose to abrade easier leaving more jacket material on the surface.
Standard black pressure washer hose is a different rubber compound that contains carbon black. When black hose is exposed to water, high temperatures and many common pressure washer chemicals the carbon black will leach out of the rubber jacket and permanently stain the surface.
However all hoses, standard and non-marking blue and gray, when being dragged across a rough surface have small particles of the rubber outer cover abraded off. With non-marking hose there is no carbon black in the jacket material that stains or permanently marks the surface. The small particles of rubber jacket however will show and can collect in depressions on the surface or where rinse water is channeled by the hose itself or other equipment. These particles are easily rinsed away. High temperature operation softens the silicone rubber jacket material and causes the hose to abrade easier leaving more jacket material on the surface.
Standard black pressure washer hose is a different rubber compound that contains carbon black. When black hose is exposed to water, high temperatures and many common pressure washer chemicals the carbon black will leach out of the rubber jacket and permanently stain the surface.
Was this answer helpful?
Yes
1
No
0
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
How-To Articles
Fixing a Leaky Pressure Washer Hose
A leaky hose means you're lacking some serious water pressure. It may be temp...
How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Pressure Washers How-To Library
Articles, Tips and Buying Guides from Our Experts
+
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
BE 50-Foot (3/8") 4000 PSI Grey Non-Marking High Pressure Hose w/ Quick Connectors (Hot/Cold Water)
Customer Review Images
