Generac 6620
Generac 6620
Hover to zoom
1 Of 5

Generac 50-Foot (5/16") 3100 PSI High Pressure Hose w/ M22 Connectors

Model:

6620

Write a Review
$61.99
In-Stock
Ships in 1-3 Business Days
Shipping to60601
Generac 50-Foot (5/16
Generac 50-Foot (5/16") 3100 PSI High Pressure Hose w/ M22 Connectors
Model: 6620
$61.99
Features
Specifications
Reviews
Product Q&A
Accessories
How-To Articles
Share

Features

Grade

Consumer

Style

Gas

Inflow

22m Threaded (Female)

Outflow

22m Threaded (Female)

  • 50 Foot, 3100 PSI Replacement Hose
  • Fits Generac models with male M22 connectors
  • Female M22 Connectors At Both Ends
  • May also fit other brands with male M22 connectors on gun & pump
  • 5/16-Inch Diameter PVC Blend High Pressure Hose
  • Rated to a maximum of 3100 PSI
  • Light weight & flexible; high visibility orange
  • Nylon reinforced & non-marring
  • Bend Restrictors At Both Ends
  • Reduce wear & tear on connectors
  • Hose Is 14MM & NOT Compatible With 15MM M22 Electric Pressure Washers
California residents see
Warning: This product can expose you to chemicals including Di-n-butyl phthalate (DBP) which is known to the State of California to cause Developmental Harm.
For more information go to: www.p65Warnings.ca.gov

Specifications

6620
specs product image PID-15161
Hose
Hose Length
50 Feet
Hose Material
PVC/Plastic
Hose Diameter
5/16 Inch
Hose Connections
M22
Temperature
cold
Non-Marking
Yes
Accessories
Accessory Grade
Consumer
Accessory Style
Gas
Inflow
22m Threaded (Female)
Outflow
22m Threaded (Female)
Rated PSI
3100 PSI
Overview
Weight
5.25 Pounds
Consumer Warranty
90 Days
Product Width
5/16 Inches
Product Height
5/16 Inches
Dimensions
50 Feet
UPC
696471066203

Reviews

(10)
Generac 6620 Reviews & Ratings

Product Q&A

(3)
Product Questions Answered by Jim. the Pressure Washer Expert
Question
+
Mike, this 50' Generac 5/16" hose is a novel concept problem is that the 6602 has 1/4" factory installed hose. I've read another customer's question where you recommenced against connecting two different size hoses. With that all said, does this 50' hose extension come in a 1/4" size. 'Cause quite frankly it's pointless to buy the 6602 with a hose that will be rendered useless if I have to go with the overkill Simpson Monster Hose just to get the length I need.
Randy 
from New York 
July 10, 2016
Answer
The general rule is that you can double the OEM hose length without much falloff in pressure- so Generac makes a 30-foot, 1/4" Generac hose that would do the trick.

Your unit would also support 3/8" hose- you may want to consider upgrading and adding quick connect adapters for convenience in the long run.

Monster Hose is great for commercial applications where it will be used daily and dragged over rough surfaces like parking lots and sidewalks. It is overkill for most consumer applications.


Was this answer helpful?
Yes
0
No
0
Question
+
Mike I have a DeVilbiss/Ex-Cell 2100 PSI 6HP Pressure Washer that came with a 25 ft. 1/4" hose. I inadvertently let the hose touch the hot engine and it burst. Can I use the GENERAC 50 FT. (5/16") 3100 PSI M22 Hose as a replacement ?
Michael 
from Florida 
July 04, 2016
Answer
Yes, just confirm your current high pressure hose has female threaded ends on both sides of this hose, as the fittings are in this Generac hose.
Was this answer helpful?
Yes
0
No
0
Question
+
Hi Mike - I just asked the question about this 6620. I'm sorry, I should have specified that I want to use it as an extension to my existing 30' Generac 1/4" hose. I was considering the Simpson Monster 50' 3/8" hose as well because I think it's made of better material, it comes with quick connectors, and it's 3/8". Main question is, can I connect differing diameters of hoses? I greatly appreciate your expert advice!
Doug 
from Maryland 
December 15, 2015
Answer
Thanks for your inquiry. Normally we do not recommend attaching 2 different diameter hose together as an extension. Instead, I would recommend replacing the 1/4" hose that comes with the unit and replacing it with a 3/8" 100 FT hose for your needs. I would recommend the 100FT Simpson monster hose model MH10038QC. With that you would need 2 adapters to convert your unit to quick connect. You would need adapter model D10037 and D10088. I have attached links for you to view the items I am recommending.

Simpson Monster Hose

D10037 Adapter

D10088 Adapter
Was this answer helpful?
Yes
0
No
0

Recommended Accessories

Pressure Washers Direct expert image
Expert Recommended Accessories Selected by Jim, our Expert
Required Accessories 9
These accessories are required to properly setup/install this product.
Optional Accessories 10

How-To Articles

How to Pick the Perfect Replacement Hose
How to Pick the Perfect Replacement Hose
High-pressure hoses take a heck of a beating from the pressurized water they co...
Fixing a Leaky Pressure Washer Hose
Fixing a Leaky Pressure Washer Hose
A leaky hose means you're lacking some serious water pressure.   It may be temp...
How To Pick The Perfect Replacement Power Washer Gun
How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Pressure Washers How-To Library
Pressure Washers How-To Library
Articles, Tips and Buying Guides from Our Experts
 
Media Gallery
Generac 50-Foot (5/16") 3100 PSI High Pressure Hose w/ M22 Connectors
Generac 6620
+
Reset View
Customer Review Images