How to Pick the Perfect Replacement Hose
High-pressure hoses take a heck of a beating from the pressurized water they co...
On Sale
Hover to zoom
1 Of 5
Simpson Monster 100-Foot (3/8") 4500 PSI High-Pressure Hose w/ Quick Connectors
Model:
41030
+
Share This Product
Features
Grade
Professional
Style
Gas
Inflow
3/8" Snap Coupler (Male)
Outflow
3/8" Snap Coupler (Female)
- Finest Hose Available For Cold Water Gas Pressure Washers
- Dual braid technology features polyester braid over tough liner
- Brass coated steel braid covers the polyester braid
- Clear, non-marring outer jacket over the brass coated steel braid
- Tough And Durable
- Rated up to 140°F; cold water applications only
- Includes 6 inch Rubber bend protectors on both ends
- Fits Most Gas Pressure Washers Up To 4500 PSI
- Fitted with 3/8" male and female quick-connect fittings
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
For more information go to: www.p65Warnings.ca.gov
Specifications
41030
Hose
Hose Length
100 Feet
Hose Material
Polyurethane
Hose Diameter
3/8 Inch
Hose Connections
Quick-Connect
Temperature
cold
Non-Marking
Yes
Accessories
Accessory Grade
Professional
Accessory Style
Gas
Inflow
3/8" Snap Coupler (Male)
Outflow
3/8" Snap Coupler (Female)
Rated PSI
4500 PSI
Overview
Weight
20 Pounds
Consumer Warranty
90 Days
Product Width
3/8 Inches
Product Height
3/8 Inches
Dimensions
100 Feet
UPC
879399000270
Additional Model Numbers
MH10038QC, 41030
Reviews
(18)
Simpson 41030 Reviews & Ratings
Product Q&A
(3)
Product Questions
Answered by Jim. the Pressure Washer Expert
Question
+−
if I buy this hose will it simply quick connect to another quick connect hose as on the pressure pro 1500 portable hand carry
Eric Norman
from Alabama
May 26, 2015
Answer
Yes, you could use any 3/8" quick connect hose with that unit for an extension or a replacement. This hose would be a great choice for you.
Was this answer helpful?
Yes
0
No
0
Question
+−
My NON-MARKING hose is leaving marks!! Help?
Margaret Mulberry
from Illinois
October 17, 2014
Answer
Regarding non-marking leaving “marks” the non-marking hose jacket is a silicone rubber compound. When being used it does not permanently mark or staining the surface.
However all hoses, standard and non-marking blue and gray, when being dragged across a rough surface have small particles of the rubber outer cover abraded off. With non-marking hose there is no carbon black in the jacket material that stains or permanently marks the surface. The small particles of rubber jacket however will show and can collect in depressions on the surface or where rinse water is channeled by the hose itself or other equipment. These particles are easily rinsed away. High temperature operation softens the silicone rubber jacket material and causes the hose to abrade easier leaving more jacket material on the surface.
Standard black pressure washer hose is a different rubber compound that contains carbon black. When black hose is exposed to water, high temperatures and many common pressure washer chemicals the carbon black will leach out of the rubber jacket and permanently stain the surface.
However all hoses, standard and non-marking blue and gray, when being dragged across a rough surface have small particles of the rubber outer cover abraded off. With non-marking hose there is no carbon black in the jacket material that stains or permanently marks the surface. The small particles of rubber jacket however will show and can collect in depressions on the surface or where rinse water is channeled by the hose itself or other equipment. These particles are easily rinsed away. High temperature operation softens the silicone rubber jacket material and causes the hose to abrade easier leaving more jacket material on the surface.
Standard black pressure washer hose is a different rubber compound that contains carbon black. When black hose is exposed to water, high temperatures and many common pressure washer chemicals the carbon black will leach out of the rubber jacket and permanently stain the surface.
Was this answer helpful?
Yes
1
No
0
Question
+−
Is this a non-marking hose?
Rick Whitfield
from Colorado
April 30, 2011
Answer
Yes, this hose has a polyurethane coating that is definitely non-marring.
Was this answer helpful?
Yes
0
No
0
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
How-To Articles
Fixing a Leaky Pressure Washer Hose
A leaky hose means you're lacking some serious water pressure. It may be temp...
How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...
Pressure Washers How-To Library
Articles, Tips and Buying Guides from Our Experts
+
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
Simpson Monster 100-Foot (3/8") 4500 PSI High-Pressure Hose w/ Quick Connectors
Customer Review Images
